Sign Up Our Newsletter











  Home > PRODUCTS > Muzzle Brakes >

PWS Precision Rifle Comp .308-.338 Mag
PWS Precision Rifle Compensator (PRC)


 
Alternative Views:


Our Price: $99.95
Deal of the Day Price: $89.95


Availability:: IN STOCK
Product Code: PWS PRC 5/8X24
Qty:

Description
 
Primary Weapons Systems (PWS) Precision Rifle Compensator (PRC)

The PRC is a specialized compensator for precision rifles that is designed to dramtically reduce felt recoil while allowing the shooter to maintain an accurate sight picture of the target. The PRC is ported in a way to reduce dust signature when firing from the prone position. It is designed for cartridges up to .338 Lapua and works very well with .308 Win, .30-06, and any of the .300 and .338 Magnums. Also works well with any 7.62 semi-auto battle rifle that has the standard 5/8x24 RH threads. Has been shown to be effective even with smaller calibers such as 6mm and 6.5mm as well. Perfectly at home in tactical or sporting applications. Due to its weight and diameter it works best with barrels with a diameter of .720 - .875". Capable of greater recoil reduction than the PWS FSC30 compensator due to larger diameter, longer ported area and more ports. Ports are cut to minimize downward blast and dust signature and allows more gas to be vented upwards to keep the muzzle down. Ports are angled 30 degrees to the rear for very high efficiency in recoil reduction. This compensator reduces felt recoil approximately 60 percent and is one of our most effective muzzle brakes and one of our most popular.

Is very popular with Remington 700 and Savage Tactical bolt actions that come with factory threaded barrels as well as tactical semi-autos and AR-10 type rifles. This is a favorite of customers with the Rem 700 SPC Tactical or AAC models that come with threaded barrels. Pictures show it mounted on a typical .740 diameter AR-10 barrel. Barrels that are .875 diameter like the precision bolt actions fit snug into the rear recess in the comp.

Length: 3.00"
Diameter: .980"
Weight: 4.5oz
Thread Pattern: 5/8x24 RH.

The exit hole is .375 cal, so .338 is the largest caliber that should be used with it.

*Supplied with 5/8" Shim Kit for proper alignment on barrel. Shims are covered by the rear of the compensator when mounted for a super clean look.
Features
  • Very effective recoil reduction especially with magnum cartridges
  • Works very well with any full power .30 or .338 caliber cartridge
  • Effective even with 6.5-7mm cartridges
  • Less blast and lower pressure than many other compensators
  • Vented upwards for low dust signature
  • Unique design, high quality, lifetime warranty, made in USA.
Average Customer Review: 5 of 5 Total Reviews: 9 WRITE A REVIEW

Related Products...
BattleComp BABC 7.62/6.8 Black
Our Price: $209.99

Add
Battle Comp BABC 7.62/6.8 Black
JP Tactical Compensator Black .308 cal Bull Barrel
Sale Price: $94.95

Add
JP Tactical Compensator Black .308 cal Bull Barrel
JP Tactical Compensator Black .308 cal .875 barrel
Sale Price: $94.95

Add
JP Tactical Compensator Black .308 cal .875 barrel
Seekins Precision Advanced Tactical Compensator .308/7.62 - Black
Sale Price: $89.00

Add
Seekins Precision Compensator - Black - .308/7.62
JP Tactical Compensator Black .308 cal .875 barrel
Sale Price: $85.45

Add
JP Tactical Compensator Black .308 cal .875 barrel
Smith Enterprise 7.62mm Muzzle Brake 5/8x24
Sale Price: $73.00

Add
SEI 7.62mm Muzzle Brake 5/8x24


  1 of 1 people found the following review helpful:
 
Great for Remington 700 .308 March 4, 2016
Reviewer: KT from OKC  
This thing is amazing! My .308 now has less kick than my AR-15. On my first outing after install, I was able to fire 100 rounds without any shoulder issues afterwards. Only difficulty I had was during install; I was not able to line it up properly using the shims provided. Contacted nokick and they quickly sent out some additional shims and I was then able to attain proper alignment. Rifle shoots like a dream now. Can't recommend this or nokick.com enough!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
excellent for 300WM September 18, 2015
Reviewer: Anonymous Person from San Diego, CA United States  
I purchased one of these for a Remmington 700 5R barrel in 300 win mag. It was extremely unpleasant to shoot with 208gr AMAX going just over 2900FPS. After installing this compensator it felt more like a standard 150gr 30-06 hunting round. Follow up shots required very little adjustment, I could see my shots impact through my scope and it didn't piss off everyone shooting prone for 20 feet in both directions. It does what it says and way more than I expected. I'd suggest letting your friends know not to stand directly behind you.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Perfect for Rem 700 AAC-SD June 11, 2015
Reviewer: Rich from Odessa, FL  
Got the PWS PRC comp today, and your YouTube video was 100% spot on.  The fit of the comp to my Remington 700 AAC-SD barrel looks like the comp was made with this barrel in mind.  I could not be happier with my purchase.  It is a pleasure to do business with a company that is accurate with their product descriptions.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
Great product; Great Company & USA MADE!! October 7, 2014
Reviewer: Scott Livingston from Elk Grove, CA United States  
I spent quite some time deciding on a compensator for my Remington 700 AAC.  In the end I obviously went with this one.  There many reasons for choosing this compensator:
1. I like how the compensator is a bit more streamlined that some of the competitors, not quite so bulky.  2. The company was extremely easy to deal with, my order was at my doorstep within 3 days of ordering it (FL to CA)  and when I called to ask a question about the shipping method, a real English speaking person with a heartbeat answered the phone and was able to give me the information I needed in a clear and friendly manor. (Odd isn’t it?)  3. After receiving it I pulled my rifle out and had it mounted within 10min.  The shim kit that it came with worked perfectly, for some reason I prefer the shims instead of a crush washer, just seems like a better solution to me.  4. Feel comfortable knowing that the shims are COMPLETELY hidden in the recessed area of the compensator, just like advertised. 5. I put about 80 rounds downrange in one sitting since purchasing this compensator and contrary what some people think about needing one for a .308, it does help and thanks to whoever designed this compensator it looks cool while doing it. And since my rifle came with a threaded barrel I needed something, just doesn’t look right having a cap on there. 6. If I had to guess I would think it took about 40% to 50% of the recoil out. 7. I was surprised that the report wasn’t much too much louder than the rifle without the compensator.  What I and the other people I was shooting with did notice however was that the report was sharper almost piercing.  But overall the report from the rifle was more than bearable using standard hearing protection. 8.  If you are torn between this and another compensator, I can tell you that you will not be disappointed spending the money on this one, you most definitely get what you pay for and what they advertise as far as performance.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
GREAT MUZZLE BRAKE....!! September 23, 2013
Reviewer: CHRIS S from AMERY WI  
We have Two of the PWS 30=338 Mag Muzzle

Brakes....One on a Remington 700 AAC,

One on a Savage Precision 10 5 R Rifling...

HIGHLY---HIGHLY---Recommended These

are GREAT MUZZLE BRAKES...

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

PRODUCTS > Muzzle Brakes
PRODUCTS > AR-10 Parts
PRODUCTS > AR-15 Parts
PRODUCTS > AR-15 Parts > Muzzle Brakes
PRODUCTS > AR-10 Parts > Muzzle Brakes
HOT SELLERS
PRODUCTS