JP Low Profile Adjustable Gas Block for .750" barrel (Stainless)
The JP Adjustable Gas System is an integral part of the JP “recoil management” system. It works for both AR-15 and AR-10 style rifles. Most AR-15 type rifles are over-gassed and the resulting bolt slamming effect is a very significant part of the felt recoil impulse, which slows sight recovery. JP found that controlling the bolt velocity made for a much smoother shooting rifle. This easy-to-install gas manifold allows you to tune your bolt velocity to a particular load and optimize the feel of your rifle. Gas will be adjustable up to the full level you currently have and down as far as you want to match your load. You can even shut the system off if you want to manually cycle your rifle. If you have the gas port enlarged by a gunsmith, it is then possible tune the gas up as well as down in case you want to use reduced loads or in the case of some very short-barreled AR versions, which are somewhat ammunition sensitive.
The JPGS-5B model is the latest version of the JP low profile gas block to mount underneath many types of handguard systems. This model now includes a locking adjustment feature which consists of a brass set screw that can be tensioned against the adjustment screw after it has been set to prevent any possible migration of adjustment. It is secured to the barrel by tightening 4 hex-head screws which tighten the housing evenly against the barrel to ensure no gas leaking and a super secure mount.
Made for .750 inch diameter barrel
Material: 416 Stainless Steel with Stainless Finish
Weight: 2.25 ounces
Height: 1.40" overall, .78" over bore Width: .89"
Adjustable Gas System
Roll Pin for Gas Tube installation
Hex Key for Stainless Steel Set Screw to adjust gas system and T15 Torx drive for mounting screws
*Does not include gas tube (sold seperately)