Home > PRODUCTS > AR Buffer Systems >

Hydraulic KynSHOT Recoil Buffer AR-10 Carbine (2.5")
KynShot Hydraulic Recoil Buffer AR-10 Carbine 2.5"


 
Our Price: $139.95
Sale Price: $112.95

Availability:: IN STOCK
Product Code: KYN-RB5004
Qty:

Description
 
KYNSHOT - Hydraulic Recoil Buffer for AR-10 with collapsible stock (2.5")

In our experience, this is the softest running AR buffer on the market. It shock absorbs more than any other buffer design and makes a noticeable difference in recoil and shot recovery. Reduce felt recoil, improve reliability, reduce bolt carrier speed, reduce wear on parts, reduce shock and vibration to optics, and suppress bolt bounce with this simple drop-in replacement. Designed for AR-10 rifles with a collapsible stock and an AR-15 length buffer tube which is common on many AR-10 type rifles. This buffer has a piston that is hydraulically dampened to absorb the shock of impact from the bolt carrier's rearward motion and to prevent bolt bounce as a new cartridge is chambered. You will feel less recoil and smoother operation with this buffer and you will see less movement of your sights during recoil for faster shot to shot recovery time.

This buffer is made to the highest possible quality and durability standards. Can take all the punishment your rifle can dish out. Constructed using 17-4 Stainless Steel and is built to outlast your gun. The hydraulic seal and porting technology used in this buffer has been thoroughly proven which is why the warranty on this buffer is as impressive as it is. Designed for 7.62mm/.308 AR type rifles with an M4 size buffer tube which is 7" long on the inside (instead of 7.75" for Armalite AR-10 buffer tube). DPMS LR-308 with collapsible stock will need this buffer. The best reference is that it replaces factory buffers that are 2.5" in length.

Works with factory buffer spring. Or for best performance improvement use this buffer with a more durable Sprinco .308 Carbine Extra Power Buffer Spring (their Orange Spring), or a JP Tuned and Polished 308 carbine buffer spring which will run the most quiet.

Weight: 3.8 Ounces
Length when Compressed: 2.5"
Mil-Spec Hydraulic Fluids and Seals - Ambient operating temp certified for -30F - +150F

Made in USA

ITAR Product - export of this product is strictly prohibited without a valid export license issued by the U.S. Department of State, in accordance with International Traffic in Arms Regulations (ITAR). Purchase of this product is restricted to U.S. Persons who do not intend to export this product or businesses with a valid export license operating in compliance with all applicable ITAR regulations.
Kynshot Hydraulic Recoil Buffers
Features
  • Dampens Bolt Carrier Movement for Smoother Cycling
    Reduces Recoil and Vibration
    Reduces Wear on Parts
    Speeds Sight Recovery
    Stainless Steel Construction
Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 5

Related Products...
JP Silent Captured Spring - Gen 2 AR10
Sale Price: $132.95

Add
AR-10 Silent Captured Spring
Hydraulic KynSHOT Recoil Buffer AR-10 Carbine (3.25")
Sale Price: $114.95

Add
KynShot Hydraulic Recoil Buffer AR-10 Carbine 3.25"
JP Tuned & Polished Extra Power Buffer Spring - .308 Carbine
Our Price: $22.95

Add
JP Tuned & Polished Extra Power Buffer Spring - 308 Carbine
Sprinco .308 Carbine Extra Power Buffer Spring (Orange)
Our Price: $19.95

Add
Sprinco .308 Carbine Extra Power Recoil Spring


  0 of 0 people found the following review helpful:
 
5 of 5 Hydro buffer October 30, 2019
Reviewer: Richard Evans from Mount Shasta , CA United States  
I own eight hydro buffers. Six are KynSHOT. One is on a AR-15 pistol 2 on M-4's 2 on .308 3 on AR-15's 16,18, and 22 match. The one I just purchased is for a 6.5 creedmoor 24" ultra match build. I am a 32year retired disabled Veteran. I wish these existed during the early years of my service. I can  reacquisition targets faster and shock recover time is nonexistent for larger calibers. I can fire my AR pistol with one hand with very little rise. It is almost impossible to compete in 3 gun competition without a hydro buffer. One of my kynSHOTs has about 7k rounds through it with no issues. I live in the mountains with extreme winters and have been paying close attention to hydrolic failure in the cold. So far I'm a fan and so is everyone I send to kynSHOT. Thank you. I would also like to ask if you can donate a 2.5" .308 buffer to the my local church for reviews among the congregation. I trust you will make a lot of customers. God bless.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Definitely feel a difference March 7, 2018
Reviewer: Rodel Barrameda from Columbus, GA United States  
Got one for my PSA AR10 and it made a considerable difference in felt recoil. Just to make sure I switched back to the standard buffer and yep there is definitely a difference between the two. Kynshot hydraulic buffer works.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 KynShot Hydraulic Recoil Buffer AR-10 Carbine (2.5 June 8, 2017
Reviewer: Jerry Bryant from Odessa, MO United States  
I want to thank you for great advice on the 2.5 KynShot Hydraulic Recoil Buffer for my LR-10 DPMS Oracle!  Installed with polished buffer spring just as described.  Great packing, service, and retrieval time.  You have my patronage from now on.

Just got back from the range and this installation was all it was described it would be.  This combination reduced felt recoil by 60% and lessened vertical uplift of my barrel!  I would recommend this to anyone that wishes more comfort while shooting with their LR-10!  Very satisfied!!

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 An Absolute Blast! February 6, 2015
Reviewer: Bill from Montana  
Team, took the Smith & Wesson M&P 308 to the range with all my new parts (KynShot Buffer, JP Spring and Limbsaver Pad for Magpul Stock) and had an absolute blast!
Thank you for your guidance and suggestions in my parts list and general info you gave me with this weapon. Everything worked well together and processed the shells with no issues. I will be ordering from you again for sure and sooner than later guys so thanks again!

Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
5 of 5 Great buy from a great company January 1, 2015
Reviewer: Happy Veteran from Chicago, IL  
I have this on a set up with a JP tuned Spring and a Sentry 7 had block on my AR10 and it shoots like a dream! I am definitely getting one for my AR15. By the way the guys at nokick.com have really great customer service, and got my part out to me very quickly...Thanks Guys!!

Was this review helpful to you?


Browse for more products in the same category as this item:

PRODUCTS > AR Buffer Systems
MANUFACTURERS > Kynshot Hydraulic Recoil Buffers
MANUFACTURERS
PRODUCTS