POF 7-Position Buffer Tube - Mil-Spec - AR10 - Anti-Tilt
The POF Mil-Spec 7075-T6 aircraft aluminum Anti-tilt Buffer Tube uses a "carrier cradle" extension to ensure that the carrier is always supported by the buffer tube, even when the bolt is forward. This prevents excessive carrier-tilt and premature wear on the buffer tube. The buffer-retaining pin/plunger doubles as a lock that prevents the buffer tube from rotating and becoming loose under extreme operation conditions. POF's design also features three (3) extra drain holes on the bottom rear of the tube through the last three position notches to ensure good drainage in wet and marine environments.
Is AR-10 length meaning that is it 7.75" on the inside instead of the 7.0" AR-15 buffer tube length. Made for AR-10 type weapons using 3.25" buffers. Can also be used on AR-15 type guns with a 4.0" buffer such as a Vltor A5. Made from the stronger 7075 Aluminum with a black hard coat anodized finish. Mil-Spec diameter for a tight fit with Mil-Spec sized stocks.